+4 安装画廊

Double Door通行高压灭菌器

Only CSS Gives you:

Made In the USA

Lowest Total Cost of Ownership

经过验证的质量和可靠性

直观，易于使用的控件

Consolidated’s pass-thru sterilizers are commonly used in biocontainment facilities, such as in BSL-3 rated laboratories, as well as clean-rooms. Each pass-thru model comes equipped with full touchscreen controls mounted on each end of the unit for operation from within or outside the containment area. Pass-thru units placed in BSL-3 labs are built to comply with the tough requirements of biocontainment facilities. Read more below, in our BSL-3 section, to learn more about our BSL-3 configuration.

Downloadable Resources

电子书: 17 Questions to Ask Before Buying Your Next Autoclave

这本电子书中提出和回答的17个问题将通过概述购买高压灭菌器最重要和了解的最重要的问题来帮助您做出明智的决定。

现在下载

Product Details

合并的消毒器具有丰富的功能和选择，可满足各种应用和行业。向下滚动以获取更多详细信息。

楷模

Chamber Dimensions（w x h x f-b）	Volume(Cubic Feet / Liters)	模型
16“ x 16” x 26” 40.6 x 40.6 x 66厘米	3.9 Cu。英尺 109升	PT-SSR-2A
20“ x 20” x 38” 50.8 x 50.8 x 96.5厘米	8.8 cu. ft 249升	PT-SSR-3A
24" x 24" x 36" 61 x 61 x 91.4 cm	12 cu。英尺 340升	PT-SR-24A
26" x 26" x 39" 66 x 66 x 99厘米	15.25 cu. ft 430升	PT-SR-26A
24" x 24" x 48" 61 x 61 x 122cm	16 cu。英尺 453升	PT-SR-24B
24“ x 36” x 36” 61 x 91.4 x 91.4 cm	18 cu。英尺 510 liters	PT-SR-24C
26“ x 26” x 49” 66 x 66 x 124.5 cm	19.2 cu. ft 544升	PT-SR-26B
28“ x 28” x 48” 71 x 71 x 122 cm	21.8 cu.ft 617 liters	PT-SR-28B
24“ x 36” x 48” 61 x 91.4 x 122厘米	24 cu. ft 680升	PT-SR-24D
24“ x 36” x 60” 61 x 91.4 x 152.4厘米	30 cu. ft 850升	PT-SR-24E
24“ x 36” x 72” 61 x 91.4 x 183厘米	36 cu. ft 1,019 liters	PT-SR-24F

首先阅读

在购买新的高压灭菌器之前，要了解您需要提出的17个关键问题。

下载电子书

特征

双X1控件

Controls are dual mounted on each side of the autoclave for additional ease of use.

学到更多

非专有零件

合并的消毒器包括高质量的非专有零件，可以轻松从当地供应商，授权服务组，电子店或直接通过合并获得。

Made to Order

Consolidated提供许多高压釜定制选项，以适应您独特的实验室空间。其他制造商不提供合并提供的定制水平。

学到更多

可持续性

Save water and energy in your lab with utility-saving features that are built into our sterilizers. Read more about them below.

学到更多

低成本

合并的灭菌器是由内部人员或您的本地授权服务技术人员易于维修和维护的。

学到更多

独特的室内结构

合并是唯一提供316升不锈钢和镀镍室的制造商。选择最适合您应用的室，同时最大化室内寿命。在下面阅读有关材料的更多信息。

X1™ Controller

X1™控制系统包括这些用户友好的功能：

Intuitive user interface with modern, easy to view 7″ touchscreen display.
能够编程多达50个灭菌周期的能力。
能够添加“喜欢的周期”快捷方式以快速访问。
管理人员可以防止用户修改单个周期上的灭菌参数的能力。
由行业标准的开源组件构建，可轻松提供零件和服务。

了解更多。

“合并的灭菌器非常简单且可靠，可供最终用户使用，并且从服务的角度易于处理。他们使用的非专有零件使客户的总拥有成本较低。当他们考虑下一次购买消毒器时，我建议他们合并给所有客户。”

– Independent Sterilizer Service Provider

BSL-3

Learn more about BLS here.

为BSL-3设计

为满足生物内在设施和生物安全3级额定实验室的艰难要求而建造，该实验室位于任何生命科学，生物技术或动物研究（Vivarium）设施中。消毒器采用双门，通行，配置制造。

双X1控件

All BSL-3 sterilizers come equipped with this state-of-the-art and easy-to-use control system. Full touchscreen controls are mounted on each end of the autoclave for operation from within or outside the containment area.

Bioseal

所有BSL-3的灭菌器都必须在墙壁上适当密封，以防止空气中的微生物从所含的房间传递到非隔室房间。密封法兰系统（BioSeal）将灭菌剂集成到BSL-3实验室中，以提供分离和在包含的房间和非连接房间之间的正密封。

通行门互锁系统

Prevents opening of the sterilizer door on the non-contained side until completion of a sterilization cycle. Also prevents both doors from being opened simultaneously. Designed with the flexibility to accommodate the desired direction of product flow.

Effluent Decontamination

在BSL-3实验室中，所有废物和废水都必须无菌。合并的系统将细菌捕获在高压釜室内，过滤器中，并在释放排水之前对废水进行消毒。

安全

BSL-3上的X1控制系统允许最多50个经理控制密码保护的用户名以及可锁定周期参数。

可持续功能

降低效用成本和碳足迹基于“增大化现实”技术e important consideration for many facility and sustainability stakeholders. Consolidated understands the role autoclaves can play, and we’ve developed these state-of-the-art configurations to significantly reduce water and energy usage for both new and existing sterilizers.

Ecocalendar（1/6）

所有新的消毒器均配备了基于日历的自动启动和关闭功能，称为Ecocalendar。此功能通过软件控制的自动蒸汽关闭程序有助于最大程度地减少实用程序消耗和HVAC负载。可以根据一周中的一天和一天的时间对公用事业进行自动启动和关闭。

生态夹克(2/6)

所有新的灭菌器都包含Ecojacket，并自动降低循环之间的灭菌夹克温度，从而减少蒸汽和用水的使用以及加热到房间的热量。

自动闲置关闭（3/6）

Like the EcoCalendar, this feature is equipped on all new sterilizers and helps save energy by shutting the steam supply off when not in use. It functions similarly to a “sleep-mode” for your home computer. Simply set the desired idle time and the autoclave will enter Sleep Mode after the set idle time has elapsed. This is an easy way to save energy (both steam and conditioned air) and water and is ideal for sterilizers that are periodically used.

沃特科（4/6）

Watereco系统包含在所有合并的灭菌器中。除了节水外，它还使用空气，以前冷却的废水和最少的冷水来监视水量并冷却废水。Watereco系统与冷水兼容。学到更多。

引擎盖控制（5/6）

This feature integrates the sterilizer with a local canopy hood to reduce unnecessary venting of conditioned air. Form C Dry Contacts signal your building automation system to power-down the hood when the door of the autoclave is closed. This allows labs to better control the heat-load and environmental conditions within the lab.

夹克蒸汽返回（6/6）

可以将使用房屋蒸汽的消毒器配置为允许夹克蒸汽返回。通过将无菌蒸汽从夹克返回“房屋”设施锅炉，这有助于节省能源和蒸汽消耗。

Ecocalendar

生态夹克

自动闲置关闭

沃特科

引擎盖控制

夹克蒸汽返回

高压灭菌规格

蒸汽来源

This sterilizer can accommodate or be supplied with the following steam sources:

房屋蒸汽

In most situations, standard house steam is adequate, with the use of an inlet filter to clean the steam.

Electric – Integrated Boiler

当房屋蒸汽不足并最多可供应4 kW时，需要。合并提供了多种选择，可以在灭菌器下进行：碳钢锅炉，后代碳钢锅炉和不锈钢锅炉，后代不锈钢锅炉。

Electric – Remote Boiler

这将坐在灭菌剂附近，大于45 kW。

Steam到Steam Generator

该系统由不锈钢制成，不采用诸如电动蒸汽发生器之类的加热元件。它利用现有的房屋蒸汽加热高纯净水。

Electrical Requirements

Standard voltages for electric boilers are 208, 240, 380, 480, 3 phase. Voltages must be determined prior to ordering to configure the heating elements in the generator.

为您的高压釜选择合适的蒸汽源获取帮助。

Air Removal

Depending on the application and required cycle, air removal may be achieved by gravity displacement or mechanical assistance through vacuum systems for pre- and post-cycle use as required. Here are the options below.

Gravity

所有消毒剂均设计为重力清除作为标准配置。为了去除重力空气，蒸汽的浮力用于取代空气。

真空

Available as an upgrade:建议用于多孔的灭菌和/或干燥物品（动物床上用品，带有小开口的容器，带盖，包装，流明，管道的物体）。有两个真空系统：

Venturi/ Water Ejector vacuum system是较低的前期成本选项。

液体环泵真空系统在去除空气，使用更少的水和具有更大的可控性方面更有效。

Materials

Consolidated steam sterilizer vessels are manufactured with an inner chamber and a full outer jacket. The inner chamber is available in either type 316L stainless steel or nickel-clad steel construction. Jacket construction is available in carbon steel, type 304L stainless steel or type 316L stainless steel.

CHAMBER OPTIONS

316L不锈钢

所有腔室均使用316L不锈钢制成标准配置。

镍层

Available as an upgrade:This chamber material is recommended for sterilizing high-concentration salt solutions or if the feed-water or tap-water for steam generation has high chloride content. Nickle-Clad chambers are provided with a carbon steel jacket.

夹克选项

碳素钢

Standard construction with 316L stainless steel chamber.

304L Stainless Steel

Available as an upgrade:316L不锈钢室和304L夹克。

316L不锈钢

Available as an upgrade:如果水质高于1MΩ/CM 316L不锈钢室和夹克。通常为组织培养实验室或实验室选择此选项，以蒸馏或去离子化（DI）水为消毒剂。

管道选项

Brass, Bronze, and Copper

All plumbing and components are made from high-quality brass, bronze, and copper construction. All sterilizer are built with these materials as standard construction.

316L不锈钢

Available as an upgrade:建议将316L不锈钢管道和组件与高纯水和蒸汽一起使用（由RO/DI水产生）。

总拥有成本

Consolidated prides itself on providing laboratory autoclaves with the lowest cost of ownership in the industry.

Affordable Service

We utilized a network of factory-trained service representatives who perform preventative and emergency service at affordable rates and in a timely fashion, maximizing your uptime.

非专有零件

我们的消毒剂旨在使用高质量，负担得起的非专有零件。

降低公用事业成本

Our sterilizers will help you save money on water and energy costs through utility-saving (sustainable) features that are built into the sterilizers.

自定义

控制器Mounting (1/10)

每个高压釜都配备一个控制系统，但是并非每个控制系统都以最有意义的方式安装在实验室空间配置的方式上。合并后的控制系统可以安装最适合您的空间的控制系统：右侧，左侧，顶部安装或在相邻墙上遥控。

组件和管道（2/10）

合并可以自定义位于高压釜左侧或右侧的高压釜组件和管道的位置，从而使您和您的服务团队易于访问。如果您需要将高压釜安装在墙壁上并且无法从各个方面访问高压釜，这是理想的选择。

蒸汽发生器安装（3/10）

如果您的实验室没有房屋蒸汽，则合并可以提供您选择的位置（距高压釜最多50英尺）的蒸汽发生器（即位于腔室下方）的积分（即位于腔室下方）。

高压釜框架宽度（4/10）

如果您的实验室的门框小于标准，或者您现有的壁切口狭窄，则合并后的隔离式框架可以配置具有适合您门口或现有墙壁切口的车架尺寸的高压客是。

Drainage (5/10)

If your drain is located higher than the flooring, Consolidated can install a sump pump to help transport the sterilizer effluent “uphill” to meet your drain.

腔室安装(6/10)

If you would like two sterilizers in your laboratory but lack the space required, Consolidated offers a dual “tower” configuration that reduces the footprint by 35% when compared to two autoclaves mounted side-by-side.

徽标放置(7/10)

Using our laser cutting equipment, Consolidated can personalize your autoclave by adding your school or company logo to the sterilizer paneling located on the front of the autoclave. This is a big hit for some of our clients!

定制装载车（8/10）

If you have odd-sized flasks, beakers, bioreactors or fermenters, Consolidated can customize the size of your loading cart so that it accommodates your load while still fitting into your autoclave chamber.

额外的架子（9/10）

If you’re in need of a more optimized use of your autoclave chamber space, Consolidated can create additional shelving to allow you to efficiently load your autoclave.